Qator Qatar India India UK UK
loading
title
Home Services Metallurgy, Material, Metal & Polymer Testing Polymers (Plastics & Elastomers) Impact Testing of Polymers

Impact Testing of Polymers

breadcrumb
Polymers (Plastics & Elastomers)

Impact Testing of Polymers

Impact testing measures how a polymer material absorbs energy and resists fracture when struck suddenly, rather than loaded gradually — a distinction that matters because many real-world failures happen fast, not slowly. A polymer that performs well under a slow bend test can still shatter under impact, because the two properties measure genuinely different things — how a material behaves at speed, not just under steady load.  METS Laboratories carries out impact testing on polymers to confirm whether a material can withstand the kind of sudden shock it's likely to face in service, whether that's a dropped product, a vehicle collision, or a tool striking a component during installation.

Impact Testing of Polymers
Impact Testing of Polymers
Our Services
Water & Wastewater Categories
Water (drinking water, groundwater, surface water, process water)
Wastewater (industrial effluent, domestic sewage)
Sludge (activated sludge, digested sludge, dewatered sludge)
Air & Atmospheric Categories
Air (ambient air, indoor air)
  • Stack Emissions (chimney, exhaust)
  • Dust / Particulate Matter (PM10, PM2.5)
  • Odor Monitoring
  • Uncategorized
Surface & Material Sampling
  • Swab (equipment, surfaces, food-contact areas)
  • Soil (contaminated soil, agricultural soil)
  • Sediment (riverbed, lake sediment)
  • Microbial Surface Samples
  • Noise & Physical Environment
Noise (industrial noise, environmental noise, occupational noise)
Heat Stress / Thermal Conditions
Solids, effluents, sludge & Hazardous Materials
  • Solid Waste (municipal, industrial)
  • Hazardous Waste (chemical, biomedical)
  • Construction & Demolition Waste
Chemical & Biological Analysis
  • Chemical Contaminants (metals, nutrients, organics)
  • Microbiological Analysis (bacteria, viruses, fungi)
  • Toxicology (toxins, pesticides)
Industrial & Environmental Monitoring
  • Industrial Hygiene Samples (workplace exposure)
Emission Monitoring (SO₂, NOx, CO, VOCs)
Environmental Impact Assessment Samples
Pulses and cereals
Cereals & Grains
  • Pulses & Legumes
  • Fresh Fruits
  • Fresh Vegetables
Nuts & Dry Fruits
  • Uncategorized
Feed testing
animal feed
  • Herbs & Aromatics
Dairy & Animal-Based Products
Milk & Dairy Products (cheese, yogurt, butter, ghee)
Meat & Poultry
  • Seafood & Fish
  • Eggs & Egg Products
Processed & Packaged Food Categories
Snacks & Savory Items (chips, namkeen, crackers)
Beverages (juices, soft drinks, tea, coffee)
  • Canned & Preserved Foods (pickles, jams, canned vegetables)
  • Ready-to-Eat / Ready-to-Cook Foods
  • Frozen Foods (frozen vegetables, frozen meals)
  • Sauces & Condiments (ketchup, mayonnaise, soy sauce)
  • Cereals & Breakfast Foods
  • Uncategorized
Industrial & Specialty Food Categories
  • Food Additives (preservatives, stabilizers, colors)
Flour & Milled Products (maida, atta, semolina)
  • Protein Products (soy protein, whey protein)
  • Health & Nutrition Foods (energy bars, supplements)
  • Organic & Specialty Foods (gluten-free, vegan products)
Culinary & Prepared Food Categories
  • Cooked Meals
  • Restaurant & Catering Foods
  • Ethnic & Regional Foods
Microbiology Analysis
Pathogen Detection (E. coli, Salmonella, Listeria, coliforms)
Indicator Organisms (total plate count, yeast & mold, enterobacteriaceae)
  • Water Microbiology (total coliforms, fecal coliforms, HPC)
  • Air Microbiology (airborne bacteria, fungal spores)
  • Surface/Swab Microbiology (food-contact surfaces, equipment hygiene)
  • Antimicrobial Resistance Screening (general resistance markers, non-clinical)
  • Microbial Identification (biochemical, MALDI-TOF style identification)
Molecular Biology Analysis
PCR / qPCR Testing (pathogen-specific gene targets)
DNA/RNA Extraction & Quantification
Genetic Marker Detection (species identification, authenticity testing)
Microbial Source Tracking (environmental contamination tracing)
Viral Detection (environmental viral markers)
Molecular Fingerprinting (general strain differentiation methods)
Biotoxin Analysis
  • Algal Toxins (general categories like microcystins, saxitoxins)
Mycotoxins (aflatoxins, ochratoxin, fumonisins)
  • Bacterial Toxins (staphylococcal enterotoxins, botulinum toxin families)
  • Marine Biotoxins (paralytic, diarrhetic, neurotoxic shellfish toxins)
  • Plant & Natural Toxins (ricin-like plant toxins, general phytotoxins)
Antibacterial Efficacy Testing
Bactericidal / Bacteriostatic Activity General assessments of how well a product reduces or inhibits bacterial growth.
  • Surface Disinfection Efficacy Evaluating cleaning agents, disinfectants, and sanitizers on hard surfaces.
Minimum Inhibitory Concentration (MIC) Determining the lowest concentration that inhibits bacterial growth.
Minimum Bactericidal Concentration (MBC) Determining the lowest concentration that kills bacteria.
  • Time-Kill Studies Measuring bacterial reduction over specific time intervals.
Biofilm Reduction Testing Assessing efficacy against biofilm-forming bacteria.
  • Uncategorized
Antifungal Efficacy Testing
Fungicidal / Fungistatic Activity Evaluating effectiveness against yeasts and molds.
MIC for Fungi Determining inhibitory concentrations for fungal species.
Surface & Material Fungicidal Testing For disinfectants, coatings, and environmental surfaces.
Mycotoxin-Producing Fungi Control Assessing inhibition of toxin-producing fungal species.
Antifungal Time-Kill Studies Measuring fungal reduction over time.
Antiviral Efficacy Testing
Virucidal Activity Testing Assessing the ability of a product to inactivate viruses.
Surface Virucidal Efficacy Testing disinfectants on non-porous surfaces.
Suspension Tests Evaluating antiviral activity in liquid environments.
Molecular Detection of Viral Reduction Using general nucleic-acid–based quantification to measure viral load changes.
Envelope vs. Non‑Envelope Virus Efficacy
  • Uncategorized
Compatibility & cytotoxicity studies
Cytotoxicity Screening
  • Ensuring products are not harmful to test systems.
  • Stability & Compatibility Testing
Biocompatibility
Cosmetic product testing
Safety & Toxicology Screening
General safety assessments for skin and eye compatibility.
  • Stability & Shelf-Life Testing
  • Microbial Quality Testing
Preservative Efficacy Testing (PET)
  • Physicochemical Testing
  • Ingredient Verification
  • Allergen & Sensitivity Screening
Personal Hygiene Product Testing
Handwash & Sanitizer Efficacy
Evaluating general antibacterial or antiviral performance.
Soap & Detergent Performance
  • Deodorant & Antiperspirant Testing
  • Assessing odor control and sweat‑reduction performance
  • Oral Care Product Testing .
baby diapers and adulot diapers
Hygiene Product Testing
Soaps, Detergents & Toiletries Testing: Quality, Safety, Performance and Regulatory Compliance
Skin, Hair & Body Care Product Testing
  • Skin Care Products .
  • Hair Care Products
  • Body Care Products
  • Pathogen Screening General detection of harmful microorganisms.
  • Heavy Metals Screening
  • Residual Solvents & Contaminants
  • Fragrance & Allergen Profiling
Consumer Product Testing (Non‑Food)
  • Household Cleaning Products
  • Laundry Products
  • Baby Care Products
Paper Products
  • Plastic & Packaging Materials
cigarette, tobacco
  • Uncategorized
FCM and package testing
  • migration analysis
  • Leachables & Extractables
  • Barrier Properties
  • Mechanical Strength
  • Aging properties
  • Sterility
Textile Testing
  • Physical & Mechanical Tests
Tensile strength
Tear strength
Colorfastness Tests
Colorfastness to washing
Colorfastness to light
Colorfastness to water, seawater, chlorinated water
Color Fastness to Saliva
Chemical and harmful substance Testing
pH value
Formaldehyde content
Azo dyes
Heavy metals
  • Phthalates
Allergenic dyes
  • Flame retardants
Comfort & Performance Tests
  • Air permeability
  • Moisture management
  • Thermal resistance
  • Wicking properties
Flammability Tests
  • Apparel flammability
  • Children’s sleepwear flammability
  • Upholstery flammability
Non woven and woven textile testing
  • mask
  • diaper
Leather products and accessories Testing
  • Physical & Mechanical Tests
  • Tensile strength
  • Tear strength
  • Flex resistance
  • Adhesion of finish
  • Water absorption & desorption
Footwear Testing
Whole Shoe Performance Tests
  • Flexing resistance
  • Slip resistance
  • Impact & compression resistance
  • Torsion & bending stiffness
  • Cushioning performance
Safety shoe testing
  • Upper material strength
  • Outsole abrasion
  • Midsole hardness
  • Adhesion between layers
Durability and strength Tests
  • Heel fatigue
  • Eyelet & lace strength
  • Zipper durability
Metals
  • Tensile Testing
  • Compression Testing
  • Impact Testing (Charpy/Izod).
  • Hardness Testing
  • Chemical Composition Analysis
  • Corrosion Testing
  • Metallography
Polymers (Plastics & Elastomers)
Tensile Testing
Flexural & Bend Testing.
  • Thermal Analysis
  • Chemical Resistance Testing
  • Hardness Testing
  • Aging & Weathering
Impact Testing of Polymers
Ceramics
  • Compression Testing
  • Flexural Strength (3 point/4 point bend)
  • Hardness Testing.
  • Thermal Shock Resistance.
  • Porosity & Density Testing
Composites (Fiber reinforced materials)
  • Tensile, Flexural & Shear Testing.
  • Impact Testing
  • Delamination Testing
  • Thermal Analysis
  • Fatigue Testing
Wood & Biomaterials
formaldehyde
Moisture Content
Compression Parallel/Perpendicular to Grain
  • Bending Strength
  • Hardness (Janka)
  • Decay & Fungal Resistance
Coatings & Surface Treatments
Adhesion Testing
Abrasion Resistance
  • Corrosion Resistance.
  • Thickness Measurement
Destructive Testing (DT)
  • Tensile, compression, bend, impact, hardness.
  • Used to determine ultimate strength and failure behavior.
Non Destructive Testing (NDT)
Ultrasonic Testing (UT)
Radiography (X ray)
  • Magnetic Particle Testing
  • Dye Penetrant Testing
  • Visual Inspection These methods evaluate internal or surface defects without damaging the material.
Concrete & Cementitious Materials
Compressive Strength
  • Flexural Strength.
  • Split Tensile Strength
  • Slump Test
  • Setting Time
Ultrasonic Pulse Velocity (UPV).
Chloride Content & Sulfate Attack.
  • Water Absorption & Porosity.
  • Uncategorized
Steel, composite panel & Reinforcement Materials
Tensile Test
Bend & Re-bend Tests.
Hardness Testing
Impact Testing (Charpy).
Chemical Composition (OES/XRF)
Aggregates (Coarse & Fine)
  • Sieve Analysis.
Specific Gravity & Water Absorption
Aggregate Crushing Value (ACV)
Aggregate Impact Value (AIV)
  • Los Angeles Abrasion Test
  • Flakiness & Elongation Index
  • Clay & Silt Content
Asphalt & Bituminous Materials
  • Marshall Stability & Flow
Bitumen Penetration & Softening Point
Viscosity Testing
  • Stripping Value.
  • Rutting & Fatigue Tests
  • Core Density & Compaction
Soil & Geotechnical Materials
Atterberg Limits
Proctor Compaction Test
  • California Bearing Ratio (CBR)
  • Direct Shear Test
  • Triaxial Test
  • Permeability Test.
  • Plate Load Test.
Masonry Materials (Blocks, Bricks, Mortar)
Compressive Strength of Blocks/Bricks
Water Absorption
Efflorescence Test
Bond Strength of Mortar
  • Dimensional Accuracy
Water Efficiency Testing Services
  • Water Consumption Measurement & Efficiency Rating
Flow Rate Testing for Taps, Mixers & Showers
  • Toilet & Urinal Water Efficiency Evaluation
Water-Saving Device Performance Testing
  • Compliance Testing for Water Efficiency Labeling Schemes
Sanitary Appliance Performance Testing
  • Toilet Flush Performance & Functional Testing
  • Basin, Sink & Tap Performance Evaluation
  • Showerhead & Bidet Spray Testing
  • Leakage, Pressure & Durability Testing
  • Sanitary Fixture Safety & Reliability Assessment
Fire Safety Testing Services
  • Flame Spread & Smoke Development Testing
  • Ignitability & Combustion Behavior Assessment
  • Heat Release Rate & Fire Growth Analysis
  • Fire Propagation & Thermal Exposure Testing
Fire and Flame Testing Standards
Flammability Testing for Materials
  • Fire Resistance Testing for Building Materials
  • Textile & Fabric Flammability Testing
  • Plastic & Polymer Flammability Evaluation
  • Foam, Upholstery & Furniture Fire Testing
  • Cable & Wire Flame Retardancy Testing
  • Packaging & Consumer Product Flammability Testing
Flammability standards
Structural Engineering Testing Services
  • Structural Integrity Assessment & Load Testing
  • Vibration, Deflection & Dynamic Response Analysis
  • Material Strength & Structural Performance Evaluation
  • Non‑Destructive Testing (NDT) for Structural Components
  • corrosion
  • Structural Safety Certification & Compliance Testing
Acoustic Testing & Noise Evaluation
Building Acoustic Performance Testing
  • Sound Transmission Class (STC) & Impact Insulation Class (IIC) Testing
  • Environmental Noise Measurement & Monitoring
  • Room Acoustics & Reverberation Time Testing
  • Noise Control, Vibration Isolation & Acoustic Compliance
Electromagnetic Compatibility (EMC) Testing Services
Household Electrical Appliances
  • IT & Audio‑Video Equipment
  • Industrial & Commercial Electronics
  • Lighting Products & LED Systems
  • Smart Devices, IoT & Wireless Equipment
Radiated & Conducted Emissions Testing
  • Radiated & Conducted Immunity Testing
  • Electrostatic Discharge (ESD) Testing
  • Surge, EFT & Voltage Dips Testing
Electrical & Electronics Safety Testing
  • Electrical Shock & Fire Hazard Assessment
  • Insulation Resistance & Dielectric Strength Testing
  • Leakage Current & Grounding Continuity Testing
  • Temperature Rise & Overload Protection Testing
  • Safety Compliance to IEC, UL, EN & ISO Standards
Energy Efficiency Testing
  • Energy Consumption Measurement & Efficiency Rating
  • Standby Power & Idle Mode Testing
  • Energy Labeling Compliance (EU, MEPS, SASO, DOE)
  • Performance Testing for Household & Industrial Appliances
  • Eco‑Design & Energy Star Compliance Evaluation
Soil Fertility Tests
  • Macronutrients
  • Secondary nutrients
Micronutrients
Soil Chemical and physical Properties
  • pH —
  • Electrical Conductivity (EC) —
  • Organic Matter Content
  • Cation Exchange Capacity (CEC)
  • Carbon-to-Nitrogen Ratio (C:N)
  • Texture
  • Bulk Density
  • Porosity & Water Holding Capacity
  • Infiltration Rate
  • Aggregate Stability
Soil Biological and contamination Tests
  • Microbial Biomass
  • Soil Respiration
  • Earthworm Count
  • Enzyme Activity
  • Heavy Metals —
  • Pesticide Residues
  • Hydrocarbons
  • Pathogens
Fertilizer Testing
  • NPK Content
  • Micronutrients
  • Organic Carbon
  • Granule Size & Uniformity
  • Moisture Content
  • Bulk Density
  • Solubility
  • Heavy Metals
  • Pathogens
  • Adulteration Detection
  • Uncategorized
G-Mark (Gulf Conformity Mark)
  • Low voltage electrical equipment
  • Children’s toys
  • Some mechanical products
GSO and SASO (Saudi Standards) compliance testing
  • SASO Quality Mark
  • SASO IECEE Recognition
  • Energy efficiency labeling
  • Water efficiency labeling
UAE-Specific Compliance and DCD, DCL Approvals
  • ECAS — Emirates Conformity Assessment Scheme
  • EQM — Emirates Quality Mark
  • ESMA standards (now MOIAT)
ESMA, MOIAT, ECAS and SABER registration
  • GSO technical regulations for Cosmetics
  • GSO technical regulations for Detergents
  • GSO technical regulations for Fertilizers
  • GSO technical regulations for Halal certification
Automotive products and safety
GSO vehicle safety standards
European Union (EU) Compliance & Regulatory Testing
  • Uncategorized
CE Marking
  • Low Voltage Directive (LVD)
  • EMC Directive
  • Machinery Directive
  • Toy Safety Directive
  • Medical Devices Regulation (MDR)
  • Construction Products Regulation (CPR)
Chemical & Environmental Regulations
REACH — Registration, Evaluation, Authorization of Chemicals
RoHS — Restriction of Hazardous Substances in electronics
  • WEEE — Waste Electrical & Electronic Equipment
  • CLP — Classification, Labelling & Packaging of chemicals
  • EU FCM — Food Contact Materials compliance
  • Uncategorized
Product-Specific Standards
  • EN standards (EN 71 for toys, EN 388 for gloves, EN 14683 for masks)
  • Eco-design & energy labelling
Consumer Product Safety
CPSC — Consumer Product Safety Commission
CPSIA for children’s products
Mechanical & chemical safety
EPA Environmental Protection Agency
TSCA — Toxic Substances Control Act
  • VOC limits
  • Pesticide regulations
FDA Food, drugs, cosmetics, medical devices
  • Uncategorized
R&D and Analytical Services
  • R&D and Analytical Services
  • Uncategorized
cta

Let’s talk. Subscribe Now!

Footer Image

Call Us

+971589505070

Email Us

lab@metslab.com

Address

Jurf Ind - WH No. 3, 4, 5, 6 & 7, Zone 1 P.O. Box 31442
Ajman, United Arab Emirates
Useful Links
International Locations
Social Links

©2026, Mets Lab All Rights Reserved

go top
our services:
quick contact:
we're on social media: