Qator Qatar India India UK UK
loading

METS Lab for Testing Footwear!

footwear testing

Footwear Testing Services

Whether it is adult or child shoes, retailers, brands, and providers in the footwear business should guarantee their footwear items are protected, strong, fit-for-use, and consistent with guidelines. This can be ensured with our  footwear testing  services.

Our labs offer finding and execution testing, for example, slip and slide obstruction, gagging dangers for kids, work shoe steel toe assurance, high heel exhaustion opposition, effect, and connection strength, etc. Assessing upper materials, sole materials, different parts, complete shoes, and exceptional necessities are the services included in our footwear testing.

Need for Footwear Testing

A shoe is worn for hours, on every kind of surface, and it carries the full weight of the wearer. Testing shows whether a shoe is safe and durable before it reaches customers.

  • Safety of the wearer: A sole that slips, a toe cap that fails or a heel that snaps can cause falls and injuries.
  • Protection of children: Small parts that come loose can be swallowed, and children's shoes also need careful control of chemicals.
  • Durability and quality: Tests such as flexing, abrasion and bond strength show whether a shoe will last or fall apart early.
  • Fit for use: A work shoe, a sports shoe and a party shoe face very different demands, and each needs to be tested for its intended use.
  • Compliance: Markets and buyers set requirements for performance and for restricted chemicals, and test reports give the evidence.
  • Brand reputation: Fewer failures mean fewer returns, complaints and recalls.

Physical and Performance Tests

Physical tests measure how a shoe behaves under real use. The table below explains the tests mentioned above, together with other common ones.

TestWhat It ChecksWhy It Matters
Slip resistanceHow well the sole grips wet or smooth floors, often assessed with methods such as EN ISO 13287.Slips are a leading cause of falls, especially in workplaces and in wet weather.
Choking hazards for childrenWhether small parts such as buttons, buckles, beads and decorations can come off and be swallowedYoung children put things in their mouths, so loose parts are a serious risk.
Steel toe cap protectionHow the toe cap resists impact and compression in work and safety shoes, as set out in standards such as EN ISO 20345.It protects feet from falling objects and heavy loads.
High heel fatigue resistanceWhether the heel stays attached and intact after repeated loading: ISO19956A heel that breaks can cause a fall and ruins the product.
Impact resistanceHow parts of the shoe withstand sudden knocks: ISO 20345It shows whether components crack or break in normal use.
Upper-sole bond strengthHow firmly the sole stays attached to the upper, with methods such as ISO 17708.A sole that separates is one of the most common footwear failures.
Flex resistanceWhether the sole and upper survive repeated bending, with methods such as ISO 17707.Walking bends the shoe thousands of times, and weak materials crack.
Abrasion resistance

How quickly the outsole wears away:

ISO 20871.

It shows how long the sole will last and how well it keeps its grip.
Tear and tensile strengthHow well upper materials and stitching resist pulling and tearing.ISO 3376, ISO 3377-1&2It shows whether the shoe will hold together during use.
Colour fastnessWhether dyes stay put when rubbed or exposed to water and light.Rubbing:ISO 11640, Perspiration: ISO 11641, Water: ISO 11642Dye that transfers can stain socks and feet, and faded colour looks like a defect.
Water resistanceHow well the shoe resists water where a waterproof claim is made.: ISO 5404It supports the claims made on the label and in marketing.

Chemical Testing for Footwear

Chemicals in shoes touch the skin for many hours a day, and warm, damp feet absorb more. Many markets and brands therefore restrict certain substances in footwear.

TestWhat It ChecksWhy It Matters
Heavy metals (lead, cadmium)Whether toxic metals are present in materials, dyes and metal parts.: ISO 17072-1These metals are harmful, especially for children.
Chromium VI in leatherWhether leather tanned with chromium contains the hazardous form, often tested using methods such as EN ISO 17075-1.Chromium VI can cause skin allergy.
Azo dyesWhether dyes can break down into banned aromatic amines.ISO 17234-1Some of these amines are harmful and are restricted in many markets.
PhthalatesWhether soft plastics, such as PVC soles, contain restricted plasticisers.: ISO 16181-1Some phthalates are restricted because of health concerns.
FormaldehydeWhether materials release formaldehyde.:ISO 17226-1It can irritate the skin and cause allergy in sensitive people.
PAHsWhether rubber and plastic parts contain polycyclic aromatic hydrocarbons.: ISO 16190Some PAHs are carcinogenic and are restricted in consumer products.
Brand restricted substances listsWhether a product meets a buyer's own chemical requirements.Many brands set limits that are stricter than the legal minimum.

What We Test: From Materials to Complete Shoes

We assess footwear at every level, from raw materials to the finished shoe.

  • Upper materials: Leather, textiles and synthetic materials are checked for strength, tear resistance, colour fastness and chemical safety.
  • Sole materials: Rubber, polyurethane, EVA and other sole materials are tested for abrasion, flexing, hardness and grip.
  • Different parts: Components such as insoles, linings, zips, buckles, eyelets, laces and decorations are checked separately, because a single weak part can fail the whole shoe.
  • Complete shoes: Finished shoes are tested for bond strength, flexing, heel fatigue and water resistance.
  • Exceptional necessities: Special requirements, such as steel toe protection for work shoes, children's safety checks and buyer or brand specifications, are tested against the relevant requirements.

Types of Footwear We Test

We test adult and children's footwear, including work and safety shoes, high heels, school shoes, sports and casual shoes, boots and sandals. Each type has its own risks, so we choose the tests to match how the shoe will be used.

Who Needs Footwear Testing?

Retailers use test reports to check that the shoes they buy are safe and consistent. Brands use them to protect their reputation and to meet their own quality standards. Manufacturers use testing during development and production to catch problems early. Importers and distributors use results to show that products meet the requirements of the market where they sell.

Footwear Testing at METS Lab

Our labs offer both finding and execution testing, which means we can check safety and performance in one place. We assess materials, parts and complete shoes, and we can test to special requirements. This helps retailers, brands and providers guarantee that their footwear is protected, strong, fit-for-use, and consistent with guidelines.

Our Services
  • Stack Emissions (chimney, exhaust)
  • Dust / Particulate Matter (PM10, PM2.5)
  • Odor Monitoring
  • Uncategorized
Surface & Material Sampling
  • Swab (equipment, surfaces, food-contact areas)
  • Soil (contaminated soil, agricultural soil)
  • Sediment (riverbed, lake sediment)
  • Microbial Surface Samples
  • Noise & Physical Environment
Noise (industrial noise, environmental noise, occupational noise)
Heat Stress / Thermal Conditions
Solids, effluents, sludge & Hazardous Materials
  • Solid Waste (municipal, industrial)
  • Hazardous Waste (chemical, biomedical)
  • Construction & Demolition Waste
Chemical & Biological Analysis
  • Chemical Contaminants (metals, nutrients, organics)
  • Microbiological Analysis (bacteria, viruses, fungi)
  • Toxicology (toxins, pesticides)
  • Industrial Hygiene Samples (workplace exposure)
Emission Monitoring (SOβ‚‚, NOx, CO, VOCs)
  • Canned & Preserved Foods (pickles, jams, canned vegetables)
  • Ready-to-Eat / Ready-to-Cook Foods
  • Frozen Foods (frozen vegetables, frozen meals)
  • Sauces & Condiments (ketchup, mayonnaise, soy sauce)
  • Cereals & Breakfast Foods
  • Uncategorized
Industrial & Specialty Food Categories
  • Food Additives (preservatives, stabilizers, colors)
Flour & Milled Products (maida, atta, semolina)
  • Protein Products (soy protein, whey protein)
  • Health & Nutrition Foods (energy bars, supplements)
  • Organic & Specialty Foods (gluten-free, vegan products)
Culinary & Prepared Food Categories
  • Cooked Meals
  • Restaurant & Catering Foods
  • Ethnic & Regional Foods
  • Water Microbiology (total coliforms, fecal coliforms, HPC)
  • Air Microbiology (airborne bacteria, fungal spores)
  • Surface/Swab Microbiology (food-contact surfaces, equipment hygiene)
  • Antimicrobial Resistance Screening (general resistance markers, non-clinical)
  • Microbial Identification (biochemical, MALDI-TOF style identification)
  • Algal Toxins (general categories like microcystins, saxitoxins)
  • Bacterial Toxins (staphylococcal enterotoxins, botulinum toxin families)
  • Marine Biotoxins (paralytic, diarrhetic, neurotoxic shellfish toxins)
  • Plant & Natural Toxins (ricin-like plant toxins, general phytotoxins)
  • Surface Disinfection Efficacy Evaluating cleaning agents, disinfectants, and sanitizers on hard surfaces.
Minimum Inhibitory Concentration (MIC) Determining the lowest concentration that inhibits bacterial growth.
Minimum Bactericidal Concentration (MBC) Determining the lowest concentration that kills bacteria.
  • Time-Kill Studies Measuring bacterial reduction over specific time intervals.
Biofilm Reduction Testing Assessing efficacy against biofilm-forming bacteria.
Antifungal Efficacy Testing
Fungicidal / Fungistatic Activity Evaluating effectiveness against yeasts and molds.
Surface & Material Fungicidal Testing For disinfectants, coatings, and environmental surfaces.
Mycotoxin-Producing Fungi Control Assessing inhibition of toxin-producing fungal species.
Compatibility & cytotoxicity studies
Cytotoxicity Screening
  • Ensuring products are not harmful to test systems.
  • Stability & Compatibility Testing
Skin, Hair & Body Care Product Testing
  • Skin Care Products .
  • Hair Care Products
  • Body Care Products
  • Pathogen Screening General detection of harmful microorganisms.
  • Heavy Metals Screening
  • Residual Solvents & Contaminants
  • Fragrance & Allergen Profiling
  • Household Cleaning Products
  • Laundry Products
  • Baby Care Products
  • Plastic & Packaging Materials
  • Uncategorized
FCM and package testing
  • migration analysis
  • Leachables & Extractables
  • Barrier Properties
  • Mechanical Strength
  • Aging properties
  • Sterility
Comfort & Performance Tests
  • Air permeability
  • Moisture management
  • Thermal resistance
  • Wicking properties
Flammability Tests
  • Apparel flammability
  • Children’s sleepwear flammability
  • Upholstery flammability
Non woven and woven textile testing
  • mask
  • diaper
Leather products and accessories Testing
  • Physical & Mechanical Tests
  • Tensile strength
  • Tear strength
  • Flex resistance
  • Adhesion of finish
  • Water absorption & desorption
  • Flexing resistance
  • Slip resistance
  • Impact & compression resistance
  • Torsion & bending stiffness
  • Cushioning performance
Safety shoe testing
  • Upper material strength
  • Outsole abrasion
  • Midsole hardness
  • Adhesion between layers
Durability and strength Tests
  • Heel fatigue
  • Eyelet & lace strength
  • Zipper durability
Metals
  • Tensile Testing
  • Compression Testing
  • Impact Testing (Charpy/Izod).
  • Hardness Testing
  • Chemical Composition Analysis
  • Corrosion Testing
  • Metallography
Ceramics
  • Compression Testing
  • Flexural Strength (3 point/4 point bend)
  • Hardness Testing.
  • Thermal Shock Resistance.
  • Porosity & Density Testing
Composites (Fiber reinforced materials)
  • Tensile, Flexural & Shear Testing.
  • Impact Testing
  • Delamination Testing
  • Thermal Analysis
  • Fatigue Testing
Destructive Testing (DT)
  • Tensile, compression, bend, impact, hardness.
  • Used to determine ultimate strength and failure behavior.
  • Magnetic Particle Testing
  • Dye Penetrant Testing
  • Visual Inspection These methods evaluate internal or surface defects without damaging the material.
  • Water Consumption Measurement & Efficiency Rating
  • Toilet & Urinal Water Efficiency Evaluation
  • Compliance Testing for Water Efficiency Labeling Schemes
Sanitary Appliance Performance Testing
  • Toilet Flush Performance & Functional Testing
  • Basin, Sink & Tap Performance Evaluation
  • Showerhead & Bidet Spray Testing
  • Leakage, Pressure & Durability Testing
  • Sanitary Fixture Safety & Reliability Assessment
Fire Safety Testing Services
  • Flame Spread & Smoke Development Testing
  • Ignitability & Combustion Behavior Assessment
  • Heat Release Rate & Fire Growth Analysis
  • Fire Propagation & Thermal Exposure Testing
  • Fire Resistance Testing for Building Materials
  • Textile & Fabric Flammability Testing
  • Plastic & Polymer Flammability Evaluation
  • Foam, Upholstery & Furniture Fire Testing
  • Cable & Wire Flame Retardancy Testing
  • Packaging & Consumer Product Flammability Testing
Structural Engineering Testing Services
  • Structural Integrity Assessment & Load Testing
  • Vibration, Deflection & Dynamic Response Analysis
  • Material Strength & Structural Performance Evaluation
  • Non‑Destructive Testing (NDT) for Structural Components
  • corrosion
  • Structural Safety Certification & Compliance Testing
  • Sound Transmission Class (STC) & Impact Insulation Class (IIC) Testing
  • Environmental Noise Measurement & Monitoring
  • Room Acoustics & Reverberation Time Testing
  • Noise Control, Vibration Isolation & Acoustic Compliance
  • IT & Audio‑Video Equipment
  • Industrial & Commercial Electronics
  • Lighting Products & LED Systems
  • Smart Devices, IoT & Wireless Equipment
  • Radiated & Conducted Immunity Testing
  • Electrostatic Discharge (ESD) Testing
  • Surge, EFT & Voltage Dips Testing
Electrical & Electronics Safety Testing
  • Electrical Shock & Fire Hazard Assessment
  • Insulation Resistance & Dielectric Strength Testing
  • Leakage Current & Grounding Continuity Testing
  • Temperature Rise & Overload Protection Testing
  • Safety Compliance to IEC, UL, EN & ISO Standards
Energy Efficiency Testing
  • Energy Consumption Measurement & Efficiency Rating
  • Standby Power & Idle Mode Testing
  • Energy Labeling Compliance (EU, MEPS, SASO, DOE)
  • Performance Testing for Household & Industrial Appliances
  • Eco‑Design & Energy Star Compliance Evaluation
Soil Chemical and physical Properties
  • pH β€”
  • Electrical Conductivity (EC) β€”
  • Organic Matter Content
  • Cation Exchange Capacity (CEC)
  • Carbon-to-Nitrogen Ratio (C:N)
  • Texture
  • Bulk Density
  • Porosity & Water Holding Capacity
  • Infiltration Rate
  • Aggregate Stability
Soil Biological and contamination Tests
  • Microbial Biomass
  • Soil Respiration
  • Earthworm Count
  • Enzyme Activity
  • Heavy Metals β€”
  • Pesticide Residues
  • Hydrocarbons
  • Pathogens
  • NPK Content
  • Micronutrients
  • Organic Carbon
  • Granule Size & Uniformity
  • Moisture Content
  • Bulk Density
  • Solubility
  • Heavy Metals
  • Pathogens
  • Adulteration Detection
  • Uncategorized
G-Mark (Gulf Conformity Mark)
  • Low voltage electrical equipment
  • Children’s toys
  • Some mechanical products
GSO and SASO (Saudi Standards) compliance testing
  • SASO Quality Mark
  • SASO IECEE Recognition
  • Energy efficiency labeling
  • Water efficiency labeling
UAE-Specific Compliance and DCD, DCL Approvals
  • ECAS β€” Emirates Conformity Assessment Scheme
  • EQM β€” Emirates Quality Mark
  • ESMA standards (now MOIAT)
ESMA, MOIAT, ECAS and SABER registration
  • GSO technical regulations for Cosmetics
  • GSO technical regulations for Detergents
  • GSO technical regulations for Fertilizers
  • GSO technical regulations for Halal certification
CE Marking
  • Low Voltage Directive (LVD)
  • EMC Directive
  • Machinery Directive
  • Toy Safety Directive
  • Medical Devices Regulation (MDR)
  • Construction Products Regulation (CPR)
Product-Specific Standards
  • EN standards (EN 71 for toys, EN 388 for gloves, EN 14683 for masks)
  • Eco-design & energy labelling
  • R&D and Analytical Services
  • Uncategorized
cta

Let’s talk. Subscribe Now!