STRC provides expert mechanical & electro mechanical Calibration services to a wide range of industries from aerospace to pharmaceutical & many more. The breadth of our capabilities allows us to respond to the diverse electro & mechanical Calibration needs of our customers within best possible turnaround time.
We use calibration standards traceable to national and international standards to ensure highest measurement confidence to our customers.
- Calibration Weight Set F1 Class
- Calibration Weight Set F2 Class
- Calibration Weight Set M1 Class
- Micro Balance
- Electronic Balance
- Volumetric Flask
- Graduate Pipette
- Pressure Gauge
- Magnehelic Gauge
- Vacuum Gauge
- Pressure Transmitter
- Compression Testing Machine
- Universal Testing Machine
- Torque Screw Driver
- Torque Wrench
- Rockwell Hardness Tester
- Tachometer
- Centrifuge
- Vibration Machine
- Vernier Caliper
- Micrometer
- Depth Micrometer
- Micrometer Head
- Height Gauge
- Thread Plug Gauge
- Dial Indicator
- Bore Gauge
- Steel Scale
- Measuring Tape
- Plain Plug Gauge
- Ring Gauge
- Filler Gauge
- Try Square
- Sieves
- Radius Gauge
- Measuring Pins
- Dial Thickness Gauge
- Coating Thickness Gauge
- Standard Foils
- Thread Measuring Wire/ Three wire unit
- Snap Gauge
- V-Block
- Bevel Protractor
- Combination Set
- Test Sieves
- Dial Calibration Tester
- Profile Projector
Scope of Accreditation
Mass
| Weight$ ( Conventional Mass) |
1 mg 2 mg 5 mg 10 mg 20 mg 50 mg 100 mg 200 mg 500 mg 1 g 2 g 5 g 10 g 20 g 50 g 100 g 200 g 500 g 1 kg 2 kg 5 kg 10 kg 20 kg 50 kg |
0.02 mg 0.02 mg 0.02 mg 0.02 mg 0.02 mg 0.02 mg 0.02 mg 0.02 mg 0.02 mg 0.02 mg 0.02 mg 0.03 mg 0.03 mg 0.04 mg 0.04 mg 0.02 mg 0.03 mg 0.02 g 0.02 g 0.02 g 0.2 g 0.2 g 0.5 g 4.3 g | Using Standard Weights of E2 Class, F1 Class and Weighing Balance Substitution method as per OIML R-111-1: 2004 |
| Weighing Balance♣ (Electronic) |
1 mg to 500 mg 500 mg to 50 g 50 g to 200 g 200 g to 2 kg 2 kg to 20 kg | 0.10 mg 0.15 mg 0.4 mg 28 mg 0.4 g | Using F1 & M1 Class Weights Method as per OIML R-76-1: 2006 |
| 1 mg to 2000 g Readibility: d= 0.01 mg & 0.1 mg | 0.1 mg | Using Weight Class E2 Procedure based on OIML R-76-1: 2006 | |
| 200 g to 1 kg Readibility: d=1 mg 1 kg to 2 kg Readibility: d=0.01 g | 3.0 mg 20 mg | Using Std. Weight Class F1 Upto 50 kg (20 kg, 20kg, 10 kg), M1 | |
| 2 kg to 20 kg Readibility: d=0.1 g 20 kg to 100 kg Readibility: d=10 g | 0.30 mg 0.013 mg |
Volume
| Volume$ (Laboratory Glassware) | 1 ml 2 ml 5 ml 10 ml 20 ml 25 ml 50 ml 100 ml 200 ml 250 ml 500 ml 1000 ml 2000 ml | 0.0001 ml 0.0003 ml 0.0003 ml 0.0004 ml 0.0004 ml 0.0004 ml 0.001 ml 0.001 ml 0.003 ml 0.002 ml 0.004ml 0.012 ml 0.015 ml | Using Weight & Precision balance by Gravimetric Method as per IS/ ISO 4787:2010 |
| Volume$ (Micropipette) | 10 µl 20 µl 50 µl 100 µl 200 µl 500 µl 1000 µl | 0.06 µl 0.08 µl 0.06 µl 0.06 µl 0.06 µl 0.06 µl 0.06 µl | Using Precision Balance (Upto 50 g, 0.01 mg) by Volumetric Method based on ISO 8655-6: 2002 |
Acceleration & Speed
| RPM Contact Type ♣ | 20 rpm to 3000 rpm | ± 6 % rdg | Using Standard Tachometer |
| RPM Non-Contact Type ♣ | 20 rpm to 20000 rpm | ± 6 % rdg |
Accoustics
| Sound Level Mete r♯ | 94dB , 114dB | ±1.2 dB | Using Sound Level |
Pressure & Vacuume
| Hydraulic Pressure- Dial Pressure Gauges, Digital Pressure Gauge, Pressure Indicator System, Pressure Transmitters ♯ | 2.5 kg/cm² to 50 kg/cm²>50 kg/cm² to 600 kg/cm² | 0.20 kg/cm² 0.30 kg/cm² | By Comparison method: Using Digital Pressure Gauge ( DKD-R6.1) |
| Pneumatic PressurE ♯ (Megnehelic Gauge) | Upto 2940 Pa | 23.52 Pa | Using Digital Pressure Gauge |
| Vacuum – Negative Pressure ♯ | -600 mmHg to 0 mmHg | 5.9 mm Hg | Using Digital Pressure Gauge |
Force
| Verification of Static Uniaxial Testing Machines ♯ Tension & Compression Compression : | 2 kN to 200 kN 200 kN to 2000 kN | 0.52 % ** 0.54 % ** | Using Load Cell Using Proving Ring as per IS: 1828 Part-1 2005 |